Installation And Connection - Beko MOF28310X Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3

Installation and connection

3.1 Installation and
connection
• Remove all packing material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
• Remove any protective film found on the micro-
wave oven cabinet surface.
• Do not remove the light brown Mica cover that
is attached to the oven cavity to protect the
magnetron.
• Select a flat surface that provides sufficient
space for inlet and outlet ducts.
30 cm
30 cm
20 cm
20 cm
min.85 cm
• Minimum installation height is 85 cm.
• The rear surface of appliance shall be placed
against a wall. Leave a minimum clearance of
30 cm above the oven, a minimum clearance
of 20 cm is required between the oven and any
adjacent walls.
• Do not remove the legs from the bottom of the
oven.
• Blocking the intake and / or outlet openings can
damage the oven.
• Place the oven as far away from radios and
TV as possible. Operation of microwave oven
may cause interference to your radio or TV
reception. 2. Plug your oven into a standard
household outlet. Be sure the voltage and the
frequency is the same as the voltage and the
frequency on the rating label.
12 / EN
WARNING: Do not install oven
over a range cooktop or other
A
heat-producing appliance. If in-
stalled near or over a heat source,
the oven could be damaged and the
warranty would be void.
The accessible surface may be hot
during operation.
Microwave Oven / User Manual

Publicité

Table des Matières
loading

Table des Matières