Introduction; Features; Important Information About Self-Measurement; Electromagnetic Interference - maniquick mq102 Mode D'emploi

1. Introduction

1.1. Features

The blood-pressure monitor is a fully automatic, digital blood-pressure measuring device for use on the
upper arm, which enables very fast and reliable measurement of the systolic and diastolic blood-pressure
as well as the pulse frequency by way of the oscillometric method of measuring. The device offers a very
high and clinical tested measurement accuracy and has been designed to provide a maximum of user-
friendliness.
Thanks to the large LCD display, both operational status and cuff pressure are visible for the entire duration
of the measurement.
Before using, please read through this instruction manual carefully and then keep it in a safe place.
For further questions on the subject of blood-pressure and its measurement, please contact your doctor.
Attention!

1.2. Important information about self-measurement

• Do not forget: self-measurement means Control, not diagnosis or treatment. Unusual values must
always be discussed with your doctor. Under no circumstances should you alter the dosages of any
drugs prescribed by your doctor.
• The pulse display is not suitable for checking the frequency of heart pacemakers!
• In cases of cardiac irregularity (Arrhythmia), measurements made with this instrument should only
be evaluated after consultation with the doctor.

Electromagnetic interference:

The device contains sensitive electronic components (Microcomputer). Therefore, avoid strong electrical
or electromagnetic fields in the direct vicinity of the device (e.g. mobile telephones, microwave cookers).
These can lead to temporary impairment of the measuring accuracy.

2. Important information on the subject of blood-pressure and its Measurement

2.1. How does high/low blood-pressure arise?

The level of blood-pressure is determined in a part of the brain, the so-called circulatory centre, and
adapted to the respective situation by way of feedback via the nervous system.
To adjust the blood-pressure, the strength and frequency of the heart (Pulse), as well as the width of
circulatory blood vessels is altered. The latter is effected by way of fine muscles in the blood-vessel walls.
The level of arterial blood-pressure changes periodically during the heart activity: During the «blood
ejection» (Systole) the value is maximal (systolic blood-pressure value), at the end of the heart's «rest
period» (Diastole) minimal (diastolic blood-pressure value).
The blood-pressure values must lie within certain normal ranges in order to prevent particular diseases.

2.2 Which values are normal?

Blood pressure is too high if at rest, the systolic blood pressure is over 140 mmHg and/or the diastolic pressure
is above 90 mmHg. If you obtain readings in this range, consult your doctor immediately. High blood pressure
values over time damage blood vessels, vital organs such as the kidney and even your heart.
When blood pressure values are too low, i.e. systolic values under 100 mmHg and/or diastolic values under
60 mmHg, consult your doctor.
GB
29