Device Connection - AVer M15W Mode D'emploi

Device Connection

1
Plug in power adapter and turn on M15W.
[Note]
 Please fully charge the camera for the first time use.
 When the camera is power on, the camera is in "Standby" mode.
In standby mode, it can be charging with the USB connection
between other devices; but the power supply is required 5V2A
and the charging time will be longer.
 The laptop, projector, or monitor cannot provide the power
through the USB connection to the camera while the camera is
operating.
 When the camera is charging with the wall outlet, the battery
indicator is in green flashing.
 Press
properly.
2
Connect M15W to laptop and HDMI display.
[Note]
 The Wi-Fi mode is on when the camera is powered up.
 When camera connects to a laptop through the USB port, the Wi-Fi
mode is disabled. Please follow the direction on HDMI device.
+ to reboot when the camera doesn't work
English-4