One for All Essential 6 URC3660 Mode D'emploi page 10

The procedure to program is as follows: Say for example, the first
3 Sports channels are on channels 200, 201 and 239, you can assign
shortcuts to these channels on the Red (Sports) key. To do this:
Firstly select the device you use to watch live TV. For example if you are
a Bell subscriber and you have set up your Set Top Box on the STB key,
press STB. Now you can program the channel shortcuts.
1.
2.
3.
4.
5.
6.
The LED will blink twice and the shortcuts are now programmed. When
watching live TV, simply hold down the Red key for 3 seconds, and
the first Channel Shortcut will be sent (in this example channel 200).
The next time you hold down the Red Key, the shortcut for the next
Channel Shortcut will be sent (in this case channel 201).
You can reprogram each of the different colour keys with different
lists of channel numbers, by holding down the Setup and a different
coloured key at step 1, and pressing and releasing the same key at
step 3. Each coloured key has a different icon to help you remember
the channels that you have stored there. You can program up to 10
different channel numbers per key.
If you wish to reset the key to default, the procedure is as follows:
1.
2.
3.
4.
The key is now reset.
APP SHORTCUT KEYS
The Essential remote features three App Shortcut Keys which can
be used to open apps on your Smart Devices. If your original remote
control has a Netflix, Amazon Prime Video or YouTube key, these keys
will perform the same function.
712822 Essential-6 CAN_Manual URC3660 RDN1111220 incl. Codelist.indd 10 712822 Essential-6 CAN_Manual URC3660 RDN1111220 incl. Codelist.indd 10
Hold down the SETUP key and the Red key until the
LED blinks twice
Enter the first channel number (200)
Press and release the Red key
Enter the next channel number (in this example 201)
Repeat Steps 3 and 4 for each channel shortcut you want to add
After entering the last channel number you want,
press and hold the SETUP key.
Press the device key you have programmed the
shortcuts on (for example STB).
Hold down the SETUP key and the key you wish
to reset (for example the Green key) until the LED
blinks twice.
Press and release the key to reset (for example the
Green key).
Hold down the SETUP key until the LED blinks
twice.
10
11-12-2020 12:07 11-12-2020 12:07