Power On/ Standby - Trevi RC 80D4 DAB Manuel D'utilisateur

Installation
Insert the plug of the supplied power adapter into the power supply socket (12) and
connect the power supply to a 110-230V ~ 50/60Hz power socket.
OPERATION

Power On/ Standby:

1. Press / Stand-by (1) button to turn On the unit;
2. Press it again to put the unit in Stand-by mode (the display shows time and
date).
Volume adjustment
To use the VOL - (9) and VOL + (10) keys to increase or decrease the volume.
Time Setting
The time will be set automatically by turning on the device in DAB mode.
Setting Alarm
To set alarm 1 or 2, follow the next steps:
1. In clock mode (Stand-by), press the MODE button (8) to enter the alarm
settings and confirm with the SNOOZE/ENTER/SCAN button (7);
2. Press the SELECT < (4) or SELECT > (5) button to adjust the time and confirm
with SNOOZE/ENTER/SCAN (7) key;
3. Use the SELECT < (4) or SELECT > (5) button again to adjust the minutes and
confirm with the SNOOZE/ENTER/SCAN (7) key;
4. Use the SELECT < (4) or SELECT > (5) button to select the duration and confirm
with the SNOOZE/ENTER/SCAN (7) key;
5. Press the SELECT < (4) or SELECT > (5) button to select the type of ringtone (FM,
DAB or BUZZER) and confirm with the SNOOZE/ENTER/SCAN (7) key;
6. Press the SELECT < (4) or SELECT > (5) button to select the frequency (once,
daily, weekly, week-end only) and confirm with SNOOZE/ENTER/SCAN (7) key;
7. Press the SELECT < (4) or SELECT > (5) button to set the date and confirm
with SNOOZE/ENTER/SCAN (7) key;
8. Press the SELECT < (4) or SELECT > (5) button to set the Volume level and
confirm with SNOOZE/ENTER/SCAN (7) key.
9. Press the SELECT < (4) or SELECT > (5) button to activate or deactivate the
alarm and confirm with SNOOZE/ENTER/SCAN (7) key.
Once the alarm is activated, the bell symbol will appear on the display with the
number 1 for the first alarm and number 2 for the second alarm.
Turn off the alarm
To stop the alarm completely (ringtone or radio) press
To momentarily stop the alarm sound, press the SNOOZE/ENTER/SCAN button (7);
the interruption lasts 9 minutes, after which the alarm goes back on.
/ Stand-by (1) button.