Introduction; Product Description; Usb Connection; Io-Link Connection - Di-soric IO-Link Device Tool V4 Mode D'emploi

Introduction

The IO-Link Device V4 tool can be used for operating sensors and actuators with an IO-Link interface (IO-Link
devices). The IO-Link devices are described by XML device descriptions, so they can be conveniently monitored and
configured in multiple languages. The tool is designed for presetting, testing and demonstrating IO-Link devices. The
tool is not intended for ongoing operation in production systems.
Scope of delivery:
USB IO-Link Master V2
-USB A-B cable
-AC adapter (24V/24W)
-"Read Me First" document
Connecting cable (M12 coupling, 4-pin / M12 plug, 4-pin)
Adapter plug (M8 coupling, 3-pin / M12 plug, 3-pin)
Adapter plug (M8 coupling, 4-pin / M12 plug, 4-pin)

USB connection

The USB connection acts as a communication interface between the master and the computer. The
connection can be established using the cable provided.
Pin
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5

IO-Link connection

M12 (A-coded socket) interface for a sensor/actuator with IO-Link (cable not included in the scope of delivery).
Pin
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5

Connection of the AC adapter

A standard USB port provides 500 mA at 5 V. Without an AC adapter the IO-Link Master provides about
80 mA at 24 V. That enables many IO-Link devices to be operated.
If an IO-Link device requires more current (including starting current), the AC adapter has to be used. Please
note that some laptops are particularly sensitive to starting currents. In case of doubt, use the AC adapter. The
pin assignment is pictured below.
Signal Function
+5V VBUS +5 V DC / 500 mA
D- Data -
D+ Data +
ID no contact
GND Ground
Signal Function
+24V +24 V 1.0 A / 80 mA
IO-Link / DI/DO IO-Link / DI/DO
GND 0V
IO-Link IO-Link / DI/DO
- NC

Product description

IOL-Master
VSHM-Z-0.6/VKM-Z/4 (available as an option)
M8K/M12S (available as an option)
M8K/M12S/4 (available as an option)
13