Beper 50.940A Manuel D'instructions page 11

Multifunctional steam brush Use instructions
When used for the first time the soleplate may diffuse a light smoke caused by evapora-
tion of protective oil used in factory ; that is not dangerous and smoke will disappear after
some use.
The iron may contain some residues into the tank ; when used for the first time the iron,
release the steam several times steam in order to eliminate the internal residues
Never pull the supply cord to unplug the appliance.
Do not roll up the electric cord around the iron.
Keep away to a reasonable distance the supply cord from the iron plate, especially when it is hot.
When making a break or if not used, put the iron on the iron rest in vertical position.
Fill or empty the tank when the appliance is unplugged from the socket.
Do not fill the tank over his maximum capacity.
Do not fill with mixture stain-removing, vinegar, scaling or chemical agent, but use only distilled or
demineralised water.
The plate of the iron becomes very hot, take care not to burn yourself.
Never direct the jet of steam towards your face.
Always choose the right temperature according the cloth which has to be ironed.
Do not use the stream station as a heater. Do not iron the wet clothes, let them dry before ironing.
Do not pass the iron on buttons or zipper in order to not to damage the plate.
Before cleaning, unplug the supply cord.
If you no longer use this appliance, please keep away from children.
Product description
1. Steam brush body
2. Water tank cover
3. Water Tank
4. Indicator light
5. Steam button
6. Ergonomic handle
7. Cord protector
Introduce
This is the newly two in one steam brush.
Characteristic:
1.Solid ironing and garment cleaning can be easily enabled. The unique design of brush can also
remove dust of garment during ironing. It will also soften your garments.
2.The appliance soleplate can remove lint ball via the special weave fibre on the soleplate.
3.With delicate size, it can generate shot of steam, accordingly cause your ironing easily and
comfortable operating.
4.Base plate has a Teflon coating with a thickness of 20mm. It's cause you smoothly to operate
Operation
How to fill the water tank
1.Use a measuring cup and take about 100ml water, open the water tank cover, filling the water
along the opening.
2.Close the opening after water filling.
8. Steam brush stand
9. Brush button
10. Temperature knob
11. Teflon soleplate
12. Lint Romover
13. Plate brush
11