Autotune; Listening To Fm; Change Stations; Change The Information Shown On-Screen - PURE CHRONOS CD II Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31

Autotune

If you lose a station signal, or wish to update your station list, you can perform an Autotune
to retune all DAB stations. Press the Menu button, then scroll to and select 'Autotune'. Push
the Navigation dial to confirm

Listening to FM

Change stations

To change stations, press the Stations button, then rotate the Navigation dial
When listening to FM there are two tuning modes, Manual and Seek (default):
Manual Rotating the Navigation dial tunes down or up in steps of 0.05 MHz
Seek
Rotating the Navigation dial scans to the next/previous station.
By default, Chronos CD is set to Seek.
To change the tuning mode, press Menu when listening to FM and select 'FM tuning mode'.

Change the information shown on-screen

Chronos CD can display different information relating to the FM station you are listening to.
To change the information shown:
1. Press Menu and select 'Display'.
2. Use the Navigation dial to cycle through the following options:
Radio Text
Date

FM Stereo mode

Select Stereo (default) or Mono signal mode − mono may improve audio clarity where stereo
signals are weak.
To switch between FM Stereo and Mono modes, Press Menu and select 'FM stereo mode'.
Scrolling text and information broadcast by the station.
The current date.
EN
5

Publicité

Table des Matières
loading

Table des Matières