Install The Exhaust Duct Into The Window - Beko BEPB 09C Mode D'emploi

6 Installation
1. Install the adaptor A and adaptor B (flat mouth or round mouth) onto the exhaust duct as shown in
Fig. A or Fig.B.
(Be used to install to the window)
Fig. A
2. Connect the exhaust duct to the Air outlet connector on back of the unit. Slide-in the adaptor A
downwards until it is locked in place. (Fig.C)
Air outlet connector

6.4 Install the exhaust duct into the window

1. Adjust the window bracket as per width or height of your window and insert the plastic pin to fix at
the desired position.
2. Install the Window slider kit into the window.
Your window kit has been designed to fit most standard vertical and horizontal window
applications. However, it may be necessary for you to improve or modify some aspects of the
installation procedure for certain types of window. Please refer to Fig. D & Fig. E for minimum and
maximum window openings.
16 / 116 EN
(flat mouth)
Adaptor A
Window slider kit
or
(Be used to install to the wall (only for some units))
or
Fig. C
Plastic Pin
Mobile room air conditioner / User Manual
(round mouth)
Fig. B