Manual Operation (Without Remote); How To Operate Your Unit Without The Remote Control - Beko BIVPI 090 Mode D'emploi

3

Manual operation (without remote)

3.1 How to operate your unit without the remote control

In the event that your remote control fails to work, your unit can be operated manually with the
MANUAL CONTROL button located on the indoor unit. Note that manual operation is not a long-term
solution, and that operating the unit with your remote control is strongly recommended.
Before manual operation
Unit must be turned off before manual operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of the unit.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL button again to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off.
6. Close the front panel.
Warning
A
The manual button is intended for testing purposes and emergency operation only. Please
do not use this function unless the remote is lost and it is absolutely necessary. To restore
regular operation, use the remote control to activate the unit.
14 / 136 EN
Manual control button
Split-type room air conditioner / User Manual