Control Panel; Temp. Indicator; Function Buttons - Beko BEPB 09C Mode D'emploi

3

Control panel

There are two kinds about control panel, Fig A and Fig B, the actual shape shall prevail.
Fig A
Fig B

3.1 Temp. indicator

• I n cooling or heating mode, when + or - button is pressed, the setting temperature is displayed and
be adjusted.
• T here are two kind of types about Temp. indicator default display, the actual shape shall prevail.
1. The default display is setting temperature.
2. The default display is room temperature. After flashing 5 seconds when adjust setting
temperature, the display will revert back to room temperature.

3.2 Function buttons

1. button  Press this button to make the unit run or stop.
2. / button  Press this button, the Timer/ indicator light will illuminate, then press the + or -
TIME R
button to set the desired time.
Note:
C
With the unit on, press this button to set off timer.
With the unit off, press this button to set on timer.
3. / button  Press this button to enter Sleep mode, which the unit will exit after 10 hours of
S LE E P
continuous operation and restore to the previous status.
C
Note:
The Sleep function can not be activated in Fan mode.
Mobile room air conditioner / User Manual
High Cool
Mid Dry
Low Fan
Heat
6 5
6 5
Timer
C
F
Sleep
4 3
Temp. indicator
C
F
4 3
Temp. indicator
Power
Timer
Sleep
Water
full
2 1
!
1
2
11 / 116 EN