Instructions for safety and environment
Take care not to trap
the power cable.
1.1.1 HC warning
If the product comprises
a cooling system using
R600a gas, take care
to avoid damaging the
cooling system and its
pipe while using and
moving the product.
This gas is flammable.
If the cooling system
is damaged, keep the
product away from
sources of fire and
ventilate the room
immediately.
The label on the
inner left side
C
indicates the type
of gas used in the
product.
1.1.2 For models
with water
dispenser
Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If
your water pressure
exceeds 80 psi (5.5
bar), use a pressure
limiting valve in your
mains system. If you do
not know how to check
your water pressure,
ask for the help of a
professional plumber.
If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
Consult Professional
plumbers if you are not
sure that there is no
water hammer effect
in your installation.
Do not install on the
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
6 / 40 EN
Refrigerator / User Manual