Using The Vacuum Cleaner - Inventum STS625R Mode D'emploi

CHARGING THE VACUUM CLEANER
Place the vacuum cleaner on the base of the charging stand. Make sure you align the
connection points at the back of the vacuum cleaner with the connection points of the
charging stand.
As soon as the adaptor is plugged in, the vacuum cleaner will charge. The indicator light
will flash.
When the battery of the vacuum cleaner is empty, the charging will take 5 hours. When
the battery is completely charged, charging will stop. The indicator ligthts will light up
continuously and after 50 seconds it will be off.
Unplug the adaptor when the vacuum cleaner is left on the charging stand for a longer
period of time without being used.
TIPS
• A fully charged battery will give continuous cleaning of approx. 50 minutes on the economical ECO setting and approx. 25 minutes
on the turbo setting.
• The battery has a build in self-protection safety. When the surface temperature of the battery exceeds 55°C or gets below 0°C, the
battery will stop charging. The charging will continue when the surface temperature of the battery is between 0°C and 45°C.
• During use the surface of the battery can not exceed 65°C. The battery will enter the self-protection mode and the battery will cut
off the electricity to the vacuum cleaner. When the surface temperature of the battery goes back below 65°C, the vacuum cleaner
can be used again.
• We recommend that you discharge the battery at least once a month and then fully recharge it, to maintain optimal performance.
Warning! Always ensure your hands are dry before placing the appliance on the charging stand.
Warning! Never touch the brush inside the turbo brush when the appliance is on.
Waarschuwing! Only use the original included adaptor to charge the vacuum cleaner. Ohter adaptors can damage the appliance and
even be dangerous.
5

using the vacuum cleaner

SWITCHING THE VACUUM CLEANER ON
Press the on/off button
starts in the ECO mode. Press the on/off button
Press the on/off button
The turbo brush will rotate automatically when the vacuum cleaner is switched on.
USING THE VACUUM CLEANER AS A HAND HELD
The vacuum cleaner can also be used as a hand vacuum cleaner.
Remove the hand vacuum cleaner by pressing the button to release [ 3 ]. Press the on/off button
vacuum cleaner to switch it on.
The hand vacuum cleaner can be used with of without the turbo brush or crevice nozzle. Place the
crevice nozzle in the opening of the hand vacuum cleaner.
The crevice nozzle can be used in two ways: with or without the brush.
Place the hand vacuum cleaner back in the housing. Place the suction opening first and then press
the handle back.
INDICATION OF THE INDICATION LIGHT
The vacuum cleaner has indication lighs which announce the battery with three bars ___.
1 bar _ : battery is 1 to 30% full
2 bars __ : battery is 30 to 60% full
3 bars ___ : battery is 60 to 100% full
When the adapter is plugged in, the vacuum cleaner will charge. The indicator lights will flash. When the battery is completely charged,
the charging will stop. The indicator ligthts will light up continuously and after 50 seconds it will be off.
STORAGE
Put the vacuum cleaner on the charging stand after every use.
When the vacuum cleaner needs to charged, make sure the adaptor is plugged in.
Always unplug the adaptor when the vacuum cleaner is left on the charging stand for a longer period of time without being used.
[ 1 ] on the handle of the vacuum cleaner to switch the vacuum cleaner on. The suction power control
[ 1 ] on the handle again to activate the turbo setting.
[ 1 ] on the handle button again and the vacuum cleaner will shut off.
[ 4 ]on the handle of the hand
English • 19