Before First Use; Assembly - Inventum STS625R Mode D'emploi

3
before first use
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner from the packaging
and remove all traces of packaging from the device and any promotional stickers. Keep the packaging (plastic bags and cardboard)
out of the reach of children. After unpacking the vacuum cleaner, check the device for external damage that may have occurred
during transport. Place the vacuum cleaner on a secure, dry and level surface.
4

assembly

The following parts can be found in the giftbox:
1. Turbo brush
2. Hand vacuum cleaner
3. Vacuum unit
4. Handle
5. Brush for crevice nozzle
6. Crevice nozzle
7. Charging stand - base
8. Charging stand - cradle
9. Adaptor
1
CONNECTING AND DISCONNECTING THE TURBO BRUSH
Align the connection of the turbo brush with the connection of the vacuum unit and connect the
two parts.
Press the button [1] to disconnect the turbo brush.
CONNECTING AND DISCONNECTING THE HANDLE
Align the connection of the vacuum unit with the connection of the handle and connect the two
parts.
Push a small pin in the hole [ ° ] at the back to disconnect the handle.
ASSEMBLING THE CHARGING STAND AND ADAPTOR
Connect the cradle of the charging stand to the base of the charging stand. Plug the connector of
the adaptor in at the bottom of the charging stand. Plug in the adaptor.
18 • English
2
5 6
3
7
4
8
9
1
°