Network; Others - Onkyo BD-SP353 Mode D'emploi

Problem Check
Is Control with HDMI
set to On on the
connected device?
Are multiple players
connected?

Network

Problem
BD-LIVE function
(connection to the
Internet) cannot be
used.
A message other than
"Networks is OK." is
displayed when
Connection Test is
performed.

Others

Problem
The player's power
turns off automatically.
The player's power
turns on automatically.
Remedy
Set Control with HDMI to On on the connected device. The
Control function operates when Control with HDMI is set to
On for all devices connected to the HDMI OUT terminal.
Once connections and settings of all the devices are
finished, be sure to check that the player's picture is output
to the Flat Screen TV. (Also check after changing the
connected devices and connecting and/or disconnecting
HDMI cables.) If the player's picture is not being output to
the Flat Screen TV, the Control function may not work
properly. For details, refer to the operating instructions of
the connected device.
The Control function may not work if 4 or more players,
including this player, are connected by HDMI cable.
Check Remedy
• Check your network connection or confirm your network
settings.
• The USB flash drive of files have been cleaned.
• Confirm BD-ROMs to support BD-Live function.
Is "Network is • Check that this player and the Ethernet hub (or router
FAILED." with a hub functionality) are properly connected.
displayed? • If the IP address is obtained using the DHCP server
function, check the setting is correct at the Information. For
details on the DHCP server function, see the operating
instructions for the Ethernet hub (or router with a hub
functionality).
• Set the IP address manually.
• Check the operation and settings of the DHCP server
function of the Ethernet hub (or router with hub
functionality). For details on the DHCP server function, see
the operating instructions for the Ethernet hub (or router
with a hub functionality).
• If this player has been set manually, reset the IP address
of this player or other components.
Is the Ethernet hub • Check the settings and operation the Ethernet hub (or
(or router with a router with a hub functionality). For details, see the
hub functionality) operating instructions for the Ethernet hub.
operating properly? • Reboot the Ethernet hub (or router with a hub
functionality).
Check Remedy
Is Control with The player's power may turn off together with the power of
HDMI set to On? the TV connected to the HDMI OUT terminal. If you do not
want the player's power to turn off when the TV's power is
turned off, set Control with HDMI to Off.
Is Auto Power Off If Auto Power Off is set to 15 min/30 min, the player's
set to 15 min/ power turns off automatically if no operation is performed
30 min? for over 15 minutes/30 minutes.
Is Control with The player's power may turn on together with the power of
HDMI set to On? the TV connected to the HDMI OUT terminal. If you do not
want the player's power to turn on when the TV's power is
turned on, set Control with HDMI to Off.
En
41