Onkyo BD-SP353 Mode D'emploi page 29

5. Press ENTER to enter language setting.
Press ▲/▼ to select language.
page 2/5
Choose
an OSD language before starting.
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
Previous
6. Press ENTER to enter Resolution setting.
page：3/5
Choose
a resolution that fit your TV.
Change will be applied immediately, you have 15s to
determine whether to save the setting or rollback to
prior resolution. Better performance will be provided
by a HDMI connection!
Previous
Press ▲/▼ to select an option. Press ENTER.
Use ▲/▼ to select "Yes" or "No".
page：3/5
Video Resolution
14s
has been changed!
Does everything locks all right with this resolution?
Press Yes if you want to apply it. Press No to
rollback to previous one.
Previous
7. Press ENTER to enter Aspect ratio setting.
page：4/5
Choose
an aspect retio that fit your TV.
Change will be applied in next page, you should
determine whether to save the setting or rollback to
prior aspect ratio.
Previous
Press ▲/▼ to select an option. Press ENTER.
page: 5/5
Setting
wizard is to be finished!
Now press "ENTER" key to go to Home Menu. Please enjoy it.
Previous
Setup Navigator
English
Deutsch
French
Italiano
Spanish
Hungarian
Next
OK
Setup Navigator
Auto
480p/576p
720p
1080i
1080p
1080/24p
Next
OK
Setup Navigator
Yes
No
Next
OK
Setup Navigator
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
Next
OK
Setup Navigator
Finish
OK
8. Press ENTER to return General Setting
Menu.
• [Upgrade]
You may select to Upgrade the software from
the USB flash drive.
1. Connect the USB flash drive which contains
the upgrade file package.
2. Follow the instruction on the TV screen to
confirm upgrade operation.
- Upgrade complete the software, the
system will reboot after 5s or ENTER key is
pressed.
Notes:
• Do not unplug the power cord or remove
the USB drive during software updating.
Also, do not press the reset button during
updating. Otherwise, the updating will be
aborted and malfunction may occur with the
player.
• If the upgrade file package did not pass
the verification, error prompt is displayed ,
check the package again (such as the
package is not complete)
• Make sure the firmware version is not an
old version.
• [BUDA]
During insert more than 1GB empty USB
device, you can operate BD-Live function.
And Blu-ray DVD system will be automatic
name a BUDA content.
BUDA will display Information.
1. Press ENTER.
2. Follow the instruction on the TV screen to
select {BUDA Information}.
3. Press ENTER to select "Fmt buda", BUDA
of files will be cleaned.
• [Quick Start]
{ On } - Select to shorten the required time to
boot up.
{ Off } - Select to perform normal bootup.
Language
Select the OSD(On-Screen Display)
Language, Disc Menu Language, Audio
Language, and Subtitle Language.
En
29