Audio Output; Audio Setting - Onkyo BD-SP353 Mode D'emploi

Audio Output

1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press ► to select [Audio Output], then
press ▼ .
3. Select an option, press ► to access.
Audio Output

Audio Setting

Music Optimizer
Digital Output
HDMI Audio
Max Sampling Freque...
DRC
Use cursor key to move focus, use "Enter" key
to select
Exit
4. Press ▲/▼ to select a setup option and
press ► .
5. Select the setting you wish to change and
press OK to confirm.
- Press ◄ to return to the previous menu.
- Press HOME MENU to exit the menu.
Audio Setting
• [Music Optimizer]
When compressed audio is subjected to
compression process, some parts may be
deleted. When you turn on the Music
Optimizer function, sound quality will be
improved by making up for the part that had
been deleted.
{On} – Turn on the Music Optimizer function.
Off
{Off} – Turn off the Music Optimizer function.
PCM
• [Digital Output]
PCM
48KHz Select the output mode of optical jack, options
Auto
include Bitstream, PCM, Reencode and Off.
{Bitstream} – Output digital signal without
any processing.
Reture
{PCM} – Select this to output digital audio
signals converted to 2-channel audio signals.
{Reencode} – When a BD containing
secondary audio and interactive audio is
played, the two audio signals are mixed and
converted to Dolby Digital audio or DTS audio
for output.
{Off} – Select this function when digital audio
signals are not used.
En
33