Control Function - Onkyo BD-SP353 Mode D'emploi

Problem
Noise can be heard
when outputting DTS
Digital Surround
signals from the
DIGITAL AUDIO OUT
(OPTICAL) terminal.
192 kHz or 96 kHz
digital audio signals
cannot be output
from the DIGITAL
AUDIO OUT
(OPTICAL) terminal.
Secondary audio or
interactive audio is
not output.
After a disc is
inserted, Loading
stays displayed and
playback does not
start.
■ is displayed in file
names, etc.
A message
indicating low
memory appears
while playing a
BD-ROM disc.

Control Function

Problem
Control function
does not work.
40
Check
Is the connected AV
receiver or amplifier
compatible with DTS
Digital Surround?
Is HDMI Audio properly
set?
Are Digital Output
properly set?
Are there too many files
recorded on the disc?
Check
Is the HDMI cable
properly connected?
Is the HDMI cable you
are using a High Speed
HDMI / Cable?
® TM
Is Control with HDMI set
to On on the player?
Does the connected
device support the
Control function?
Remedy
If an AV receiver or amplifier that is not compatible with
DTS Digital Surround is connected to the DIGITAL
AUDIO OUT (OPTICAL) terminal, set DTS Digital
Surround and HDMI Surround to PCM.
• Copyright-protected audio is converted to 48 kHz or
less before output.
• Set Max Sampling Frequency to 96 kHz or 192 kHz.
When listening to the sound from an HDMI OUT
terminal, set HDMI Audio to Reencode or PCM.
When listening to the sound from a DIGITAL AUDIO
OUT (OPTICAL) terminal, set Digital Output to
Reencode or PCM.
When a disc on which files are recorded is inserted,
depending on the number of files recorded on the disc,
loading may take several dozen minutes.
The characters that cannot be displayed on this player
are displayed in ■. When you are input characters via
media and peripheral equipment, etc., the characters
which include simplified character of part or all simplified
character is no true display.
• Connect a USB device.
• Erase the data stored on the connected USB device
from BUDA Setup.
Remedy
To use the Control function, connect the Flat Screen TV,
and AV system (AV receiver or amplifier, etc.) and HD
AV Converter to the HDMI OUT terminal.
Use a High Speed HDMI
may not work properly if an HDMI cable other than a
High Speed HDMI /
® TM
Set Control with HDMI to On on the player.
• The Control function will not work with devices of other
brands that do not support the Control function, even
when connected using an HDMI cable.
• The Control function will not work if devices that do not
support the Control function are connected between the
Control-compatible device and the player.
• See About connections to components of other makes
supporting the Control function on page 13.
• Even when connected to an Onkyo product compatible
with the Control function, some of the functions may not
work. Also refer to the operating instructions of the
connected device.
/ Cable. The Control function
® TM
Cable is used.