Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
C. Attaching Components To Perimeter Brackets
3
7
.
See Section 4-3B for installation hard-
ware torque values.
1
Upper Perimeter Bracket Mounting
Plate
2
Lower Perimeter Bracket Mounting
Plate
3
Side Perimeter Bracket A (w/o Miller
Label)
4
Side Perimeter Bracket B (With Miller
Label)
OM-254 497 Page 16
4
Insert rubber bumpers
beneath perimeter brackets
2
5
6
Use twenty (250M Model) or sixteen (350S
Model) 1/4 x 3/4 in. screws and nuts to at-
tach mounting plates to both the side peri-
meter bracket A and side perimeter brack-
et B.
5
Corner
6
Lifting Bracket
Use twenty 1/4 x 3/4 in. screws and nuts to
attach four corners to side perimeter
bracket A and B.
1
2
350S Model Shown
4
8
7
3
300 964-1 / Ref. 300 964-9
Use sixteen 5/16 x 1 in. screws and nuts to
attach four lifting brackets to the corners.
7
End Perimeter Bracket
Use ten 1/4 x 3/4 in. screws and nuts to at-
tach end perimeter brackets to two corners
on side perimeter brackets as shown.
8
Rubber Bumper
Insert ten (250M models) or twelve (350S
models) rubber bumpers into bottom of
perimeter brackets.
Publicité
Table des Matières
