Sony PS3 Manuel D'entretien Et De Support Technique page 8

Notes on safety when using the DUALSHOCK
Wireless Controller*
• Stop using the system immediately if you begin to feel tired or
if you experience discomfort or pain in your hands or arms
while operating the DUALSHOCK
condition persists, consult a doctor.
• The vibration function of the DUALSHOCK
Controller can aggravate injuries. Do not use the vibration
function if you have any ailment or injury to the bones, joints
or muscles of your hands or arms. If you have an ailment or an
injury, do not play software titles that contain the vibration
function using the DUALSHOCK
you have set the vibration function to [Off].
• Avoid prolonged use of the DUALSHOCK
Controller. Take a break at about 30-minute intervals.
• Note that some software titles set the vibration function to [On]
by default. To disable the vibration function, select [Settings]
[ Accessory Settings]
Function] [Off].
• When using the motion sensor function of the wireless
controller, be cautious of the following points. If the controller
hits a person or object, this may cause accidental injury or
damage.
– Before using, check that there is plenty of space around
you.
– When using the controller, grip it firmly to make sure it
cannot slip out of your hand.
– If using a controller that is connected to the PS3™ system
with a USB cable, make sure there is enough space for the
cable so that the cable will not hit a person or object. Also,
take care to avoid pulling the cable out of the PS3™ system
while using the controller.
8
3
®
3 Wireless Controller. If the
®
3 Wireless
®
3 Wireless Controller unless
®
3 Wireless
®
[Controller Vibration
– Some PlayStation and PlayStation
®
the analog controller (DUALSHOCK
controller (DUALSHOCK
PS3™ system. For details, visit www.us.playstation.com.
* These notes may also apply to other controllers.
Vents
Do not block any vents. To maintain good ventilation, follow the
guidelines below:
• Place the system at least 10 cm (4 in) away from a wall surface.
• Do not place on a carpet or rug with long fibers.
• Do not place in a narrow or cramped space.
• Do not cover with cloth.
• Do not allow dust to build up on the vents.
AC power cord use
• Any TV or component connected to the system must be
functioning properly and free of defects. If a TV or component
is faulty or defective, it may cause damage to the TV or
component, or to the system itself. As with all electrical
products, connection to faulty or defective components, or
the failure to connect to a properly wired outlet, may cause
sparking and pose a fire hazard.
• Do not plug the AC power cord for the system into an
electrical outlet until you have made all other connections.
Make sure the TV or other component is unplugged from the
electrical outlet prior to connecting it to the system.
• To help ensure safe operation, regularly inspect the AC power
cord. If damaged, stop use immediately and contact SCEA
Consumer Services ( back cover).
2 peripherals such as
®
) and analog
®
2) are not compatible with the
®