Sony PS3 Manuel D'entretien Et De Support Technique page 9

• Do not use a power cord other than the supplied AC power
cord. Do not modify the cord.
• Do not touch the plug of the AC power cord with wet hands.
• Protect the AC power cord from being walked on or pinched
particularly at plugs, expansion receptacles and the point
where the cord exits from the system.
• Do not place heavy items on the cord.
• Do not place the AC power cord near heating equipment and
do not expose the cord to heat.
• Unplug the AC power cord from the electrical outlet before
cleaning or moving the system, or when you do not intend to
use the system for an extended period of time. When
disconnecting, grasp the power cord by the plug and pull
straight out of the electrical outlet. Never pull by the cord and
do not pull out at an angle.
• Do not connect the AC power cord to a voltage transformer or
inverter. Connecting the AC power cord to a voltage
transformer for overseas travel or an inverter for use in an
automobile may cause heat to build up in the system and may
cause burns or a malfunction.
Never disassemble or modify the system or
accessories
Use the PS3™ system and accessories according to the
instructions in the product documentation. No authorization for
the analysis or modification of the system or accessories, or the
analysis and use of its circuit configurations, is provided.
Unauthorized modification of the system or accessories will void
your warranty. There are no user serviceable components
inside the PS3™ system (the supplied hard disk may be
removed but not disassembled or modified).
Additionally, there is a risk of exposure to laser radiation as well
as to electrical shock.
Network
• A broadband connection is required to access the Internet.
Note that dial-up connectivity is not supported.
• User is responsible for Internet service fees. For details, refer
to the information provided in your service contract or contact
your Internet service provider.
• Do not use a cord for a standard residential telephone line or
cables of types other than those mentioned here. Using the
wrong type of cord or cable can cause more electrical current
than necessary to flow through the LAN connector, which may
lead to heat build-up, fire or malfunction.
Wireless networking feature
• The 2.4 GHz range of radio waves used by the wireless
networking feature of this product is a range shared by
various devices. This product has been designed to minimize
the effect of other devices using the same range. However, in
some cases interference from other devices may reduce the
connection speed, shorten the signal range or cause the
connection to be terminated unexpectedly.
• When using the PS3™ system's scan function to select a
wireless LAN access point, access points that are not
intended for public use may be displayed. Only connect to an
access point that you are authorized to use.
Moisture condensation
If the system or disc is brought directly from a cold location to a
warm one, moisture may condense on the lens inside the
system or on the disc. Should this occur, the system may not
operate properly. In this case, remove the disc and turn off and
EN
9