Operation Instructions Of Remote Control - Beko BS207C Manuel D'utilisation

3 Control setting
5. Wind Speed Selection Key:
In cooling and fan mode, press the key to select high,low wind speed operation. But limited by anti-
cold conditions, under certain conditions, it may not run according to the set wind speed.
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose low wind speed
operation.
6. Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press the key to
open timing.
Press the key, when the timing symbol flashes, press up and down key to select the required timing
value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by one hour.
7. Sleep Mode:
In the cooling Mode,Press the UP and Fan Key to turn on the sleep mode, then the unit will work on
Energy-Saving and quiet type.

3.2 Operation instructions of remote control

The remote control Panel is as follows:
24 / 160 EN
6
Fan
7
Sleep
5
4
3
Mode
2
Timer
1
Local air conditioner / User Manuel