6- Storing Telephone Numbers - Geemarc CL100 Mode D'emploi

Using the phone
6 – Storing telephone numbers
Your telephone can store12 direct memories including 3 priority
numbers (24 digits maximum for priority memory and 32 digits
for M1, M2...M9). For example, the 3 priority P1, P2, P3
memories allow you to store the 3 numbers below:
= Fire
P1
To store a number please follow instructions below:
- Lift the handset.
- Press and hold
- Dial the number.
- Press
- Press M1, M2, ..., or M9 or one of 3 priority memories to store
your number.
PLEASE NOTE: If you hear a message advising "The number
you are dialing has not been recognized, please check and try
again". Please ignore this and continue with the storing process
and the numbers will be stored.
Note: Entering a new number in memory will automatically
erase the previous one.
7 – Dialing stored numbers
- Lift the handset and await the dial
tone.
- Press appropriate button M1, M2, ...,
or M9 or one of 3 priority memories,
the stored number will be dialled
automatically.
To register your stored phones
numbers, use the index located
under the base.
= Police
P2
button, until hear "Di~" sound.
button again.
11
= Doctor
P3