HANDSET:
Connect the handset with the base unit using the handsetwire and the connec-
tors and press the connectors in until you hear a light 'click'.
TELEPHONE CONNECTION:
Connect the telephone to the wall socket using the telephone wire. The small
plug should be in the connector at the backside of the base unit.
WALL MOUNTING:
The TX-550vm is suitable for wall mounting and during the conversation the
handset can be placed on the temporary holder without disconnecting:
1.
drill two holes vertical aligned at a distance of 8cm, place two plugs with
screws and have the head of the screws stick out a few millimetres
2.
mount the telephone on the wall by placing the recesses in the telephone
over the screwheads and slightly pressing the telephone down
3.
hold the telephone wire with cable clips
INSTALLATION
13