Honeywell Home RCA902N Directives D'installation page 9

Installing the Motion Detector
NOTE: Before fixing the motion detector unit to the mounting surface, it is advisable
to check that the system works correctly (i.e. that the detector and receiver are within
radio range of each other) by temporarily operating the motion detector in the cho-
sen location.
• Open the detector by inserting a flat bladed
screwdriver into the slot at the base of the unit
and pushing gently to release the catch and to
allow the front cover to be opened.
• Set the Day/Night operation switch according to
whether you wish the detector to work with chime
or switching receiver. To work with chime, set the
switch to Day, to work with switching receiver, set
the switch to Night.
DUSK
AND TIME
CONTROLS
Fig. 3
7
RCA902N
MOTION
DETECTOR
DAY/NIGHT
OPERATION
MODE SELECTOR
SWITCH
BATTERY
FIXING HOLES
69-2157EFS—09
M27295