Honeywell Home RCA902N Directives D'installation page 14

Installation Instructions
Unlearn Procedure
If you want to remove a detector from the chime's memory:
• Press the l programming button and keep it pressed. Each Icon will light in
turn. When the Icon associated with the detector to be unlearned is lit, release
the button.
• Press and hold down both l and
Please refer to your instruction manual supplied with the Switching Receiver or
Chime for the procedure to do this. At the appropriate point you will have to trigger
the detector by walking in front of it so that it detects your movement.
69-2157EFS—09
buttons until a 'beep' sound is heard.
12