Inserting Paper - Mettler Toledo P25 Mode D'emploi

Inserting paper

3
4
Notes
• If, after the first printouts the connection settings (Bauderate, Bit, Handshake)
of the balance change, the printer must be restarted (switch off / on) to start the
auto bauderate detection again.
• Auto bauderate can be switched off.
• Remove paper cover (pull on the back) (1)
2
• Insert the paper rotary axis through the core of
1
• Feed paper through the slot in the printing unit
• Press and hold until enough paper has been
• Lead paper through the paper cover slot
• Replace the paper cover (1).
the paper roll (2).
in the direction of the arrow (3).
fed (4).
Printer P25, P26, P28 7