Mettler Toledo P25 Mode D'emploi page 18

Connected Device
HG63, HR83
Russian
QB5
SQC XP
SQC16
T50, T70, T90
V20, V30, C20, C30
DL15, DL22, DL28
DL31, DL38, DL32,
DL39
DE40, DE45, DE51,
RE40D, RE50, DR40,
DR45
Refracto 30PX/GS,
Densito 30PX
SevenEasy S20, S30,
V 1.30 or higher
SevenMulti S40, S47,
S50, S70, S80,
V 1.1 or higher
SevenGo pro SG6,
SG7, SG8
DM40, DM45, DM50,
RM40, RM50
MP50, MP70, MP80
* The Printer detects automatically the settings of the connected device. Therefore disconnect the Printer of the con-
nected device and reset the Printer to set the factory settings again: Baudrate: 9600; Bit/Parity: 8 Bit No, Hand-
shake: Xon/Xoff
18 Printer P25, P26, P28
Device Settings
Select on LocalCAN Switch-
box: 1 Printer, Baudrate:
9600; Bit/Parity: 8 Bit No,
Handshake: Xon/Xoff
Select on LocalCAN Switch-
box: 1 Printer, Baudrate:
9600; Bit/Parity: 8 Bit No,
Handshake: Xon/Xoff and
language Russian
Factory settings
Printer Mode
Printer Mode
USB compact printer
USB compact printer
RS-P42
GA42
GA42
PrinterMode and Baudrate
9600
Factory settings
Baudrate: 9600;
Bit/Parity: 8 Bit No,
Handshake: Xon/Xoff
Factory settings of the
RS232 Infrared device
Printer Mode
Printer Mode
Printer Settings
*Reset
Auto baudrate off,
Balancefeature off
*Reset
Auto baudrate off,
Balancefeature off,
CharSet IBM/DOS Cyrilic
Factory settings
Factory settings
*Reset, Auto baudrate off RS-P25
Factory settings
Factory settings
*Reset
Auto baudrate off,
Balancefeature off
Auto baudrate off,
Balancefeature off,
Baudrate: 1200;
Bit/Parity: 8 Bit No,
Handshake: None
Auto baudrate off,
Balancefeature off,
Baudrate: 1200;
Bit/Parity: 8 Bit No,
Handshake: Hardware
Auto baudrate off,
Balancefeature off,
Baudrate: 9600;
Bit/Parity: 8 Bit,
Handshake: Hardware
*Reset
Auto baudrate off,
Balancefeature off
*Reset, Auto baudrate
off,
Balancefeature off
Auto baudrate off Bau-
drate: 1200;
Bit/Parity: 8 Bit No,
Handshake: off
Factory settings
Factory settings
Compatible Printer Models
RS-P25
RS-P25
RS-P25
USB-P25
USB-P25
RS-P25 (Connect with RS9
F/F Cable Order number:
51190362)
RS-P26 (Connect with RS9 F/F
Cable Order number:
51190362)
RS-P26 Connect with RS9
F/F Cable (Order number:
51190362)
RS-P26
RS-P26, RS-P25
RS-P25, RS-P26
RS-P26
Datatransfer of SevenGo pro
to the printer occurs via the
Infrared-RS232 adapter (Order
number: 51302333)
USB-P25
USB-P25