Setting The Blue Screen Mode; Selecting The Source; Editing The Input Source Name - Samsung LN-S1951W Mode D'emploi

Setting the Blue Screen Mode

Plug & Play
Language : English
Time
V-Chip
Caption
Blue Screen : Off
PC
Move Enter

Selecting the Source

Source List : TV
Edit Name
Move Enter
TV
AV : - - - -
S-Video : - - - -
Component : - - - -
PC : - - - -
DVI : - - - -
Move Enter

Editing the Input Source Name

Source List : TV
Edit Name
Move Enter
----
VCR
DVD
Cable STB
HD STB
Satellite STB
AV Receiver
DVD Receiver
Move Enter
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture
Setup
background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Press the
Return
4. Press the EXIT button to exit.
You can select among external sources connected to your TV's input jacks.
Input
1. Press the MENU button to display the menu.
Press the ENTER
2. Press the ENTER
3. Press the
You can only select a source if it is connected to your TV.
Return
Source List
You can also press the SOURCE button on the remote to choose the Input source.
Return
You can name the input device connected to the input jacks to make your input source selection easier.
Input
1. Press the MENU button to display the menu.
Press the ENTER
2. Press the
3. Press the
4. Press the
Return
After the source is selected, press the ENTER
Edit Name
The following options are available:
- - - - - VCR - DVD - Cable STB - HD STB - Satellite STB - AV Receiver - DVD Receiver
- Game - Camcorder - DVD Combo - DHR - PC
DHR: DVD HDD Recorder
5. Press the EXIT button to exit.
Return
or button to select "Setup", then press the ENTER
or button to select "Blue Screen", then press the ENTER
or button to select "On" or "Off", then press the ENTER
button to select "Input".
button to select the "Source List".
or button to select the Input source, then press ENTER
button to select "Input".
or button to select "Edit Name" then press the ENTER
or button to select the desired input device, then press the ENTER
or button repeatedly until the appropriate source name appears.
English-21
button.
button.
button.
button.
button.
button.
button.