Operation; Turning The Tv On And Off; Plug And Play Feature - Samsung LN-S1951W Mode D'emploi

Operation

Turning the TV On and Off

Plug and Play Feature

Plug & Play
Start Plug & Play
OK
Enter
Plug & Play
Language : English
Time
V-Chip
Caption
Blue Screen : Off
PC
Move Enter
Press the POWER
You can also use the POWER
When the TV is initially powered on, several basic settings proceed automatically and subsequently.
The following settings are available.
1. Press the POWER
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
Press the ENTER
EXIT
3. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER
Please check that the antenna or cable TV is connected correctly.
4. Press the or
then press the ENTER
5. Press the ENTER
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
ENTER
Press the
6. Press the ENTER
Press the or
Set the "Hour", "Minute" or "am/pm" by pressing the
7. Press the ENTER
The message "Enjoy your watching." is displayed.
• Language: Select your language.
• Air/Cable: Selects between terrestrial antenna connection or your local cable company TV system.
• Auto Program: The TV automatically cycles through all of the available channels and stores them in memory.
• Clock Set: Sets the current time for the TV clock.
You can also set the hour and minute by pressing the number buttons on the remote control.
If you want to reset this feature...
Setup
1. Press the MENU button to display the menu.
Press the or
2. Press the ENTER
3. The message "Start Plug & Play" is displayed.
Return
English-11
button on the remote control.
button on the front of the panel.
button on the remote control.
button to confirm your choice.
button.
button to select "Air", "STD", "HRC", or "IRC",
button.
button to select "Start".
button at any time to interrupt the memorization process.
button.
button to move to the "Hour", "Minute" or "am/pm".
button to confirm your setting.
This takes about one to two minutes.
button to select "Setup", then press the ENTER
button to select "Plug & Play".
or button.
or button.
button.