Storing Channels Automatically; Storing Channels Manually; Fine Tuning Channels - Samsung LN-S1951W Mode D'emploi

Storing Channels Automatically

Air/Cable : Air
Auto Program
Add/Delete
Fine Tune
Move Enter

Storing Channels Manually

Air/Cable : Air
Auto Program
Add/Delete
Fine Tune
Move Enter
Add/Delete
Add/Delete
Air 8
1/5
Ch.
Air 8
Air 9
Air 10
Air 11
Air 12
Air 13
Air 14
Air 15
Air 16
Air 17
Air 18
Air 19
Air 20
Air 21
Air 22
Add
Page Return
Move Enter

Fine Tuning Channels

Air/Cable : Air
Auto Program
Add/Delete
Fine Tune
Move Enter
The TV automatically cycles through all of the available channels and stores them in memory.
Channel
This takes about one to two minutes.
1. To select the signal source, follow the "Selecting the Video Signal-source" instructions
numbers 1 to 3 on page 12.
2. Press the or
3. Press the ENTER
Return
The channel search will start and end automatically.
ENTER
Press the
the "Channel" menu.
4. After all the available channels are stored, the "Channel" menu reappears.
5. Press the EXIT button to exit.
Press the AUTO PROG. button on the remote control.
Set the channels according to your preference. You can easily delete or add the channels you want.
Channel
1. Use the number buttons to directly select the channel that will be added or deleted.
2. Press the MENU button to display the menu.
Press the or
3. Press the or
4. Press the or
Return
5. Press the button to select "
The channels marked with "
6. Press the EXIT button to exit.
You can directly select any channel (including an erased channel) by using the number buttons on the
remote control.
Use the number buttons to directly select the channel that will be added or erased.
Press the ADD/DEL button on the remote control.
Use fine tuning to manually adjust a particular channel for optimal reception.
Channel
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the or
3. Press the or
4. Press the or
Return
5. To store the fine tuning setting in the TV's memory, press the ENTER
6. Press the EXIT button to exit.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
Fine tuned channels that have been saved are marked with an asterisk " * " on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select "Reset" by pressing the
button.
button to select "Auto Program", then press the ENTER
button to select "Start".
button at any time to interrupt the memorization process and return to
button to select "Channel", then press the ENTER
button to select "Add/Delete", then press the ENTER
button to select the channels to be deleted or added.
" column, then press the ENTER
" will be added.
button to select "Channel", then press the ENTER
button to select "Fine Tune", then press the ENTER
button to adjust the fine tuning.
English-13
button.
button.
button.
button.
button.
button.
button.
or ENTER
button and then press the