Restore Factory Settings (Res) - eQ-3 eqiva L Mode D'emploi

To set the offset temperature proceed as follows:
• Press the Mode/Menu button for at least 3 seconds.
• Select the "TOF" menu item with the selector dial and con-
firm with the OK button
• Turn the control wheel for as long as necessary until the
desired temperature appears.
• Confirm with the OK button.

10.7 Restore factory settings (RES)

The status of the programmable radiator control unit can be
manually restored by means of a reset to that when originally
supplied. This means that all the manually performed settings
are lost.
Follow these steps:
• Press and hold down the Mode/Menu button for more than
three seconds.
• Select the "RES" menu item with the selector dial and con-
firm with the OK button
• "CFM" then appears in the display.
• Confirm with the OK button.
49 49