eQ-3 eqiva L Mode D'emploi page 35

• Set the year, month, day, hour and minute (F) with the selec-
tor dial (D) and confirm with OK (I).
The motor moves the control pin backwards during the setting
of date and time.
• The display of "InS" with the rotating "∏" shows that the
motor is still travelling back. When only "InS" is shown in the
display, the radiator thermostat can be installed on the valve.
• The week program and other settings can be adjusted be-
fore installation. Press the Mode/Menu button for this, while
"InS" is shown in the display. For further information, please
see sec. „Configuration menu" on page 44.
• After the programming has been completed, "InS" is shown
again in the display and installation can take place.
E
F
I
35 35