ProBreeze PB-01 Mode D'emploi page 3

Operation:
1. Attaching the fan:
Always select a suitable safe location to position the fan.
o
When placing a fan on a table or shelf, always ensure that the power cord does not
o
hang where it can accidentally be pulled causing the unit to fall.
Do not hang or mount the fan on a wall or ceiling.
o
2. On/Off and Speed Control:
Use the dial at the back of the fan to control the speed and turn the fan on and off:
Speed-I---Low
3. Angle Adjustment:
To make adjustments to the angle of the fan, switch it off and slightly loosen the Adjusting
Screw by turning it anti-clockwise. Adjust the fan to the desired angle and tighten again by
turning the screw clockwise.
Note:
o
The fan must be clipped to a flat surface before operation.
o
The fan can be adjusted through 45 degrees vertically.
o
The fan can be rotated 360 degrees on its central pillar.
Speed-0---Off Speed-II---High