Important Safety Instructions - POWER SMITH PVLR8000A Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS
BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
WARNING:
PERSONAL INJURY.
• Do not look directly at the lighted lamps to avoid eye injuries.
• Always keep the work light away from any flammable surface or materials.
• Always check damaged or worn-out parts before using the work light.
parts will affect the work light operation. Replace or repair the damaged or worn parts immediately. If repairs are
needed, consult a professional electrician.
• Do not use a pressure washer to clean this product.
• Do not modify the work light in any way.
and/or safety and could affect the life of the product. There are specific applications for which the work light was
designed.
•
Store the work light in a secure place out of the reach of children
good working condition prior to storage and before re-use.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM-ION BATTERY POWERED
PRODUCTS
This work light is powered by a Lithium-ion battery pack. Lithium-ion batteries are small, compact and ideal for
providing long-lasting power to this product. However they must be used and charged properly. Improper use can
result in serious injury, fire or death.
WARNING:
BATTERY!
If a lithium-ion battery does catch on fire, it will burn even more violently when contacted by water.
Use a fire extinguisher.
Before using the battery charger,
•
battery, and product using the battery.
Use only the charger
•
Do not substitute any other charger.
Do not recharge the battery in damp or wet environments
•
pack or battery charger to water or rain.
Do not operate the charger with a damaged cord or plug
•
Do not operate the charger if it has received a sharp blow,
•
damaged in any way. Take it to a qualified serviceman.
Do not disassemble the charger or battery pack.
•
service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
Do not charge the battery pack
•
104 degrees F (40 degrees C). Store the product and battery pack in a location where temperature will not
exceed 122 degrees F (50 degree C). This is important to prevent serious damage to the battery cells.
To reduce risk of electric shock,
•
maintenance or cleaning.
f operating time has become excessively shorter,
• I
result in a risk of overheating, possible burns and even an explosion.
English
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
NEVER THROW WATER ON A BURNING LITHIUM-ION
read all instructions and cautionary markings on charger,
which accompanied your product or direct replacements as listed in this manual.
when temperature is below 50 degrees F (10 degrees C) or above
unplug the charger from the outlet before attempting any
2
Unauthorized modification may impair the function
. Do not expose the battery
. Replace it immediately.
Take it to a qualified serviceman when
stop operating immediately. It may
Broken
.
Inspect it for
been dropped or otherwise