Bresser Analyth ICD Instructions D'utilisation page 6

9. Cleaning and maintenance
The microscope is a high quality optical appliance. Therefore you
should make sure that dust or moisture do not come into contact with
your microscope. Avoid putting fingerprints on any optical surfaces. If
dust or dirt should nevertheless have gotten onto your microscope, or
the accessories, you should first remove this with a soft brush. Then
clean the soiled area with a soft, lint-free cloth. To remove fingerprints
from the optical surfaces it is best to use a lint-free, soft cloth, to which
you have applied some alcohol. After usage, you should stow the
microscope and the accessories in their correct containers again in a
dry and dust-free environment.
Remember: A well maintained microscope will keep its optical quality
for years and thus maintain its value.
10. Technical data:
Binocular viewing
Eyepieces: 2 pieces WF 10x (diameter 30 mm)
Total magnification: 20x, 40x
(Total magnification is the product of the magnification factor of the
objective and the magnification of the eyepiece.)
Incident illumination: halogen reflector lamp (12 V / 10 W)
Transmitted illumination: halogen lamp (12 V / 10 W)
11. Accessories
Dust protective cover
Lens paper
Fuse (250 V / 2 A, F)
Halogen reflector lamp (12 V / 10 W) - Halogen lamp (12 V / 10 W)
Object plate (glass)
Object plate (plastic black/white)
Blue filter disc
2 Eyecups
Eyepieces: 2 pieces WF 10x (diameter 30 mm)
Power cord
12. EEC conformity explanation
Meade Instruments Europe GmbH & Co. KG, resident in 46414
Rhede/Westf., Gutenbergstr. 2, Germany, explains the agreement with
in the following specified EEC guidelines for this product:
EN 61326
EN 61000-3-2:2005
Product description: Stereo microscope
Microscope Model: Analyth ICD
Rhede, July 2, 2008
Meade Instruments Europe GmbH & Co. KG
Helmut Ebbert
Managing director
13. Warranty
The period of warranty is 2 years, beginning on the day of purchase.
Please keep the cash receipt as evidence of purchase. Devices which
become defective during the warranty period can be returned to the
dealer where the device was bought. The repaired device or a new one
will then be returned to you. In the case of defects which occur after
the end of the warranty period, the devices can also be returned.
However, repairs which become necessary after the end of the warranty
period will be subject to a service fee.
Important:
Make sure to return the device carefully packed in the original
packaging in order to prevent transport damage. Please also
enclose the cash receipt (or a copy). This warranty does not imply
any restriction of your statutory rights.
Your dealer:
Name:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Postcode / City: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Street:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Telephone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of purchase: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signature:_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6