Malfunctions Of The Punching Device; Technical Data - hawa Powerlec Vario Manuel D'utilisation

Battery Insertion:
1.
Fig. 4
6.6 Malfunction of the punching device
a. Red LED (item 3, see under heading 5.1) flashing; see explanation in the table under heading 5.5 "Description of the LED display". If the error
indication does not turn off, the device must be send to the next service center for service (see last page).
b. The punching device lose oil.
The device must be sent for repair. Neither open and nor remove the seal of the device.
c. For all other questions, please contact the häwa service number: phone +49 7353 9846 0

7. Technical data

Weight of the device with battery:
Punch force:
Driving motor:
Motor voltage:
Battery capacity:
Battery charging time:
Punching time:
Capacity:
Hydraulic oil:
Ambient temperature:
Noise level:
Vibrations:
1
häwa GmbH & Co. KG • Industriestraße 12 • D-88489 Wain
NOCH NICHT FREIGEGEBEN
2
häwa GmbH & Co. KG • Industriestraße 12 • D-88489 Wain
3
Powerlec Vario
Punch driver
Stanzkraft (Force): 60 kN
Max. Lochergröße: Ø 80mm, 2,5mm ST37/2mm VA
(Max. Punch Size): 68 x 68mm, 2,5mm ST37/2mm VA
18
HE.14577 Rev. D
Größe: 43 x 18 mm
2.
2.2 kg
Approx. 60 kN
Continuous direct current field motor
18 V DC
3 Ah (BL1830) or 1.3 Ah (BL1815)
22 min BL1830 / 15 min BL1815
5 s at ø 22.5 mm, 3 mm St37
6 s at ø 61.5 mm, 3 mm St37
120 punchings / battery at Ø 22.5 mm and 3.4 mm sheet steel St 37 or
190 punchings / battery at Ø 22.5 mm and 3 mm sheet steel St 37 or
280 punchings / battery at Ø 22.5 mm and 2.5 mm sheet steel St 37
Rivolta S.B.H. 11
-20 °C up to +40 °C
70.6 dB (A) in 1 m distance
< 2.5 m / s2 (weight rms acceleration)
4
HE.9625
5
304711 ð serial number
CV ð datecode
142 ð consecutive
number
Fig. 5
5