Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
1.
Introduction
2.
Safety regulations
2.1
General safety regulations
2.2
Additional safety regulations
3.
3.1
3.2
3.3
4.
4.1
4.2
5.
5.1
5.2
5.3
5.4
Description of the automatic control of the punching process
5.5
Description of the LED display
6.
6.1
6.2
6.3
6.4
Application scope (including material thickness table)
6.5
Instructions for the use of the battery and charger
6.6
7.
8.
9.
9.1
9.2
9.3
9.4
Thanks for purchasing the Powerlec Vario.
These operating instructions provide detailed information for the operation and the safe use of the device.
Please treat this document with care and make sure that it is read, understood and followed by the operators.
This operation manual must be readily available during the entire service lifetime of the device.
If you still have questions regarding the device or its function after reading this manual, please contact your local sales office or häwa directly.
2. Safety regulations
2.1 General safety regulations
Tools with moving parts always carry a risk of injury and require a great deal of respect and diligence.
Please read this manual carefully before operating the device to minimize risks.
•
This device may only be operated in proper functioning condition.
•
Any kind of modifications must be reported immediately to the supervisor.
•
The device should be utilized in a tidy working area.
•
Make sure that the working area is well illuminated.
•
The operator is obliged to wear appropriate protective clothing (e.g. goggles).
•
Refrain from operating the device under reduced concentration (e.g.: through the influence of drugs and alcohol).
•
Keep children away.
This device is not designed and intended for any other work than described in this manual.
In the case of misuse, we will not assume any liability for resulting damages.
12
Publicité
Chapitres
Table des Matières
