emerio FH-105537.3 Mode D'emploi page 6

FH-105537.3
PARTS DESCRIPTION
1. Thermostat control switch
2. Air outlet grille
3. Heat select switch
Heat setting:
– Ventilation
–Ventilation & low temperature
–Ventilation & high temperature
THERMOSTAT
1. Rotate the switch to choose the suitable setting (ventilation/ventilation & low temperature/ ventilation &
high temperature).
2. Turn the thermostat knob in a clockwise direction to the max position.
3. Once the room temperature has reached the desired value, turn the thermostat knob slowly in anti-
clockwise direction until you hear a "click" sound; this is the setting temperature.
4. The appliance will automatically maintain the setting temperature. It will switch on when the room
temperature is below the setting, and switch off if it is above the setting.
NOTE: Do not use this appliance together with other electrical items on the same electricity group.
Warning: Do not unplug the appliance directly to cut off the power. After use, please switch off the appliance
first and then unplug it.
SAFETY SYSTEM
The appliance has a safety system which automatically switches the unit off when overheated.
⚫
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
⚫
least 10 minutes. Put the plug in the socket and switch the heater on.
MAINTENANCE
The fan heater only needs regular cleaning on the outside.
⚫
Before you clean the unit, turn the switch off. Remove the plug form the socket and wait until the fan heater
⚫
cools down completely.
Use a damp cloth to wipe the heater housing.
⚫
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the appliance.
⚫
TECHNICAL DATA
Operating voltage: 400V 3N~ 50-60Hz
Power consumption: 5000W
- 5 -
EN