Logo Placement; Minimum Mantel Clearances - Napoleon Riverside GSS42CFN Manuel D'installation Et D'opération

8.5

logo placement

Remove the backing of the logo supplied. Centre the logo on the front of the appliance, ½" (12.7mm) in from the
left side, as shown.
8.6

minimum mantel clearances

• Risk of fi re. Maintain specifi ed air space clearances to combustibles. Failure to comply with these instructions
may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top, vent, mantel,
front, etc.) are clearly maintained.
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
We recommend all mantels made from non-combustible material. If using combustible materials, follow the chart
below.
note:
Mantel temperatures will rise above normal tempera-
tures and may be hot to the touch.
fi nishing
EN
19
W415-2975 / 09.02.21