Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 - PROGRAMMING THE CHRONOTHERMOSTAT
5.7 - CHANGING COMFORT, WORKING AND ECONOMY
TEMPERATURES
If the factory set temperatures:
t1
= 20,0 °C,
t2
= 18,0 °C,
t3
= 16,5 °C (
t1
= 20,0 °C,
t2
= 22,0 °C,
t3
= 23,5 °C (summer)
do not happen to be suitable, they can be changed according to preference from
+5 °C to +39 °C, by pressing the relative buttons (fig.15).
!
Use
(press repeatedly) to select the temperature set point that needs
changing, indicated by the
t1 t2 t3
o
!
Set the current set point by pressing buttons:
the value changes by 0,1 °C.
The new temperatures selected in this way will be the new set points (for all
programs).
Approximately 8 seconds after the last key press, the screen will revert to
displaying the thermostat's regular functions: the temperature SET indicator for
the current time ( or
t1
t2
or ) will be displayed.
t3
5.8 - SMART OPERATION (Auto)
In "smart" mode, the chronothermostat
of the connected device, so that the desired temperature is already reached at
the set time, by a period of time which is automatically adjusted according to the
characteristics of the system. Maximum early switch-on: 2 hours.
(device enabled) will appear and blink on the display when activation is
anticipated.
To activate
"smart operation" press and hold
Operation is indicated by:
Auto
.
Keep
t2
pressed for 4 seconds to disable the function; the indicator
disappears.
This function can be enabled in "Winter" mode as well as in "Summer" mode.
Note: the setting will not be effected by a reset.
winter
)
o
blinking symbol.
momentarily. At each touch
anticipates
automatic activation
Auto
t2
for at least 4 seconds.
SELECT TEMPERATURE SET POINT
SELECT TEMPERATURE SET POINT INDICATOR
DAY
1
. .
t
. .
. .
0
2
4
6
8
½ h
/
DAY
PROG
R
INCREASE TEMPERATURE
DECREASE TEMPERATURE
Important: the chronothermostat will accept temperature
values that satisfy the following conditions:
Winter:
t1 greater than or equal to t2 greater than or equal to t3
Summer:
t3 greater than or equal to t2 greater than or equal to t1
Example: Winter mode (heating)
- the chronothermostat is set to go on at h 8:00
- the comfort temperature is set at 20 °C
Auto (disabled)
t°C
and
ON
20
18
Auto
7.30
8.00
8.30
Necessary time to
Reach the set Temperature
2
t1
t2
t3
10 12 14 16 18 20 22
°
C
t
OK
C
/
/
fig. 15
fig. 16
Auto (enabled)
t°C
Hours
7.30
8.00
8.30
The necessary time to reach
the set temperature
is automatically anticipated
41
Publicité
Chapitres
Table des Matières
