Maintenance Phase; After Use; Cleaning And Maintenance - Philips Lumea Comfort SC1982 Mode D'emploi

Maintenance phase

- To ensure that your skin stays smooth, we advise you to
repeat the treatment every 4 to 8 weeks. The time between
treatments may vary based on your individual hair regrowth
and also across different body areas. If too many hairs grow
back between treatments, simply shorten the treatment
interval again, but do not treat any area more often than
once every two weeks. When you use the appliance more
frequently than recommended, you do not increase the
effectiveness but you do increase the risk of skin reactions.

After use

- Press and hold the on/off/intensity button to switch off
the appliance. Pull the adapter out of the wall socket.
- Clean the skin contact surface (see chapter 'Cleaning and
maintenance').
- Store the appliance in a safe and dry place in its original box.
- Do not apply any perfumed cosmetics to treated
skin immediately after treatment.
- Do not use deodorant immediately after treatment of the
underarms. Wait until any skin redness has disappeared.
- See chapter 'Contraindications, precautions and warnings',
section 'Warning about sun exposure and artificial tanning'
for information on sun exposure and artificial tanning.

Cleaning and maintenance

To ensure optimal hair removal results, clean the appliance
after each use.
Never clean the appliance or any of its parts under the
tap.
Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the
skin contact surface.
1 Switch off the appliance and unplug it.
ENGLISH
19