Philips Lumea Comfort SC1982 Mode D'emploi page 15

Performing a skin test
Before your first treatment, perform a skin test to establish
the appropriate intensity level for each body part.
1 Insert the small plug into the appliance socket and
insert the adapter into a wall socket.
2 Press the on/off/intensity button. The light of
intensity level 1 goes on and the fan inside the
appliance starts.
3 Place the skin contact surface on the skin. Press the
flash button to release one flash at intensity level 1.
4 Move the appliance to another area and release a
flash at level 2. Continue to increase the intensity by
one level before releasing each next flash. Do not
release more than one flash in the same spot. Do not
increase the intensity beyond the maximum intensity
for your skin colour (see section 'Skin colour and
light intensity' in this chapter).
5 As soon as you experience any discomfort, reduce
the intensity level to the highest level at which there
was no discomfort.
ENGLISH
15