Prepare Measurement - Beurer BM 40 Mode D'emploi

Masquer les pouces Voir aussi pour BM 40:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31

4. Prepare measurement

Inserting battery
• Remove the battery cover from the
back of the monitor.
• Insert four AA 1.5 V alkaline
batteries. Making absolutely
sure that you insert them with
the correct polarity as marked.
Never use rechargeable bat teries.
• Replace the battery cover carefully.
If 4 warning tones have been sounded and the symbol
appears simultaneously on the display, it is no longer possible
to perform a measurement and all batteries must be replaced.
Once the batteries have been removed from the device, the
date and time must be set again. Any saved measurements are
retained.
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Setting the user memory, date and time
This menu allows you to set the following functions, one after
another.
User memory
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date and
4 x 1,5V AA (LR6)
time to retrieve them later.
The time is displayed in the 24-hour format.
If you press and hold the function buttons -/+, you can set
the values more quickly.
• Press the SET button.
The user memory symbol flashes on the display.
• Select the desired user memory by pressing the
function buttons -/+.
You have two memories, each with 60 memory spaces,
to store the measurements of two different people
separately.
• Confirm using the SET button.
22
Date
Time

Publicité

Table des Matières
loading

Table des Matières