Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation steps Merapi
● Combustion chamber door open.
● Carefully pull the lower front shield (Pos.8, Fig.3) to
the front.
● Tighten the motor retaining clip (6) with the spac-
er sleeve to the motor console. Push the servo-mo-
tor (5) onto the rotation axis of the air regulator lever
and snap into the motor retaining clip (Fig.1).
● Install the door contact switch (fastening position,
see Fig.1), the temperature sensor and the cord for
the power supply as described in chapter "General
installation steps", step 2-7.
22
Fig.1
11
5 ...Servo-motor
6 ...Motor retaining clip
11 ...Door contact switch fastening position
6
5
Publicité
Table des Matières
