Garland BG 65 Manuel D'utilisation page 25

Remove the shaft and lower the defl ector.
Place the base with the recess forward and enter the
fi rst hole through the shaft, the baffl e holding the base
and tighten the nuts. Then put the other screw with
the nut.
Defl ector
cap
Defl ector
Base
Place the defl ector cap by inserting it in the links at
the top and secure with screws and nut as shown in
the picture.
Defl ector
cap nuts
Nuts and
screws
3. Nozzle installation.
Place the nozzle as shown in the picture and fi x it with
the screws.
4. Hopper handle installation.
Place the hopper handle as shown in the picture and
fi x it with the screws.
English | 24
Nozzle
Hopper
hamdle