Identification Of Main Components; Identification Plate - GGP ITALY SHT 4620A Mode D'emploi

2
EN

1. IDENTIFICATION OF MAIN COMPONENTS

MAIN COMPONENTS
1. Power unit
2. Cutting device (blade)
3. Front guard
4. Front handgrip
5. Rear handgrip
6. Rear handgrip release command
7. Blade protection

8. Identification plate

9. Trigger switch
10. Safety switch
11. Accumulator (Battery)
12. Battery charger
13. Connection plug
IDENTIFICATION PLATE
8.1) EC Conformity marking
8.2) Name and address of the manufacturer
8.3) Acoustic output level LWA
in accordance with directive 2000/14/EC
8.4) Manufacturer's model of reference
8.5) Serial number
8.6) Year of manufacture
8.7) Voltage and current
8.8) Cutting lenght
8.9) Article Code
8.10) Manufacturing country
• Battery charger plate
8.21) Power supply frequency and voltage
8.22) Charger voltage and current
8.23) Only for internal use
8.24) Output plug type
• Accumulator plate
8.26) Rated voltage
8.27) Capacity
Do not dispose of electric equipment to ge ther with household waste material! In ob ser vance of European Directive 2002/96/EC
on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that
have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facil-
ity. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into
the foodchain, damaging your health and well-being. For further information on the disposal of this product, please contact your dealer
or your nearest domestic waste collection service.
IDENTIFICATION OF MAIN COMPONENTS
4
1
6
5
11
9
8.21
8.22
7
10
3
8
12 13
8.10 8.4 8.2
8.6 8.7 8.5 8.9
8.23
8.24
2
11
8.1 8.3
8.8
8.26 8.27