Playing Audio From A Turntable - Pioneer NC-50DAB Mode D'emploi

> Before Start > Part Names

Playing audio from a turntable

1
2
a Analog audio cable
24
> Install > Initial Setup
Connections
You can play the audio from turntables with MM cartridges
through this unit.
Connect a turntable to the PHONO (MM) IN jacks on this
unit using an analog audio cable.
0 If the connected turntable has a built-in audio equalizer,
connect it to the LINE IN jack.
a
0 If the turntable has a ground wire, connect it to the
SIGNAL GND terminal.
Playing Back
1. Turn the unit on.
2. Press PHONO to change input to Phono In.
> Playback
Advanced Setup | Firmware Update | Others
Phono
3. Start play on the turntable.
E
N