Warranty - Paslode F325R Mode D'emploi

TOOL WARRANTY
®
Paslode warrants that newly purchased power
fastening tools, parts and accessories will be free
from defects in material and workmanship for the
period shown below, after the date of delivery to
the original user.
ONE-YEAR LIMITED WARRANTY
A one-year warranty will apply to all parts, except
those which are specifically covered by an extended

warranty.

FIVE-YEAR EXTENDED LIMITED WARRANTY
A ve-year warranty will apply to all housing and cap
assembly castings.
An Illinois Tool Works Company
888 Forest Edge Drive
Vernon Hills, Illinois 60061
MODEL F325R
Framing Nailer
TOOL WARRANTY AND LIMITATIONS
®
Paslode reserves the right to change specifications, equipment, or
designs at any time without notice and without incurring obligation.
WARRANTY STATEMENT
This warranty is limited to tools sold and service requested
in the United States. To obtain information on warranty
service in the United States, refer to the Service Center
listing that was provided with your tool.
Paslode's sole liability hereunder will be to replace any
part or accessory which proves to be defective within the
speci c time period. Any replacement part or accessory
provided in accordance with this warranty will carry a
warranty for the balance of the period of warranty appli-
cable to the part it replaces. This warranty does not apply
to part replacement required due to normal wear.
This warranty is void as to any tool which has been subjected
to misuse, abuse, accidental or intentional damage, use
with fasteners, not
or quality, improperly maintained, repaired with other than
®
genuine Paslode replacement parts, damaged in transit or
handling, or which, in
or, repaired in a way that affects or detracts from the
performance of the tool.
®
PASLODE MAKES NO WARRANTY, EXPRESSED OR
IMPLIED, RELATING TO MERCHANTABILITY, FIT-
NESS, OR OTHERWISE, EXCEPT AS STATED ABOVE, AND
LIABILITY AS STATED ABOVE AND AS
ASSUMED ABOVE is in lieu of all other warranties arising
out of, or in connection with, the use and performance of the
tool, except to the extent otherwise provided by applic-
®
able law. PASLODE SHALL IN NO EVENT BE LIABLE
FOR ANY DIRECT, INDIRECT,OR CONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES
WHICH MAY ARISE FROM LOSS OF ANTICIPATED
PROFITS OR PRODUCTION, SPOILAGE OF MATERIALS,
INCREASED COST OF OPERATION, OR OTHERWISE.
15
specification, size,
opinion, has been altered