11
1
Installation with 3-point-belt
see images
-
12
23
If vehicle is equipped with ISOFIX,
the vehicle lower anchor points
may be visible at the vehicle seat
crease. See your vehicle owner's
manual for exact locations,
anchor identification, and
requirements for use.
1. Place the booster in forward-
facing position on a forward-
facing vehicle seat with
anchors, hook latch
connectors to vehicle anchors.
12
9
2
12
!
!
!
NEVER put two latch
connectors on one vehicle
ISOFIX anchor unless
specifically allowed by the
vehicle manufacturer.
2. Secure the booster firmly by
pushing it downward with
knee or hand while pulling the
adjustment belt.
13
3. For ease of unhooking, extend
the adjustment belt to its
maximum length while
pressing the adjustment
button.
14
!
The latch connectors can be
detached for use from the
compartment on the bottom
where it is stored.
15
13
14
15
10